Epever Tracer6210AN User Manual page 27

Model
Electrical Parameters
System rated voltage
Controller working voltage
range
Lead-acid battery type
Lithium battery type
Battery fuse
Rated charging current
Rated charging power
Max. PV open-circuit voltage
MPPT voltage range
MPPT tracking efficiency
Max. conversion efficiency
Full load efficiency
Temperature compensate
coefficient
Self-consumption
Grounding type
Dry contact
Communication method
LCD backlight time
Mechanical parameters
Dimension (L x W x H)
Mounting size (L x W)
Mounting hole size
Wire size
Recommended cable
Net Weight
① When connecting the controller to external devices, only one of the communication ports is
used. When connecting multiple controllers in parallel, RS485 ports are for cascaded use.
Model
Electrical Parameters
System rated voltage
Controller working voltage
range
Sealed(default) / GEL / FLD / user-defined.
LiFePO4 / Li(NiCoMn)O2 / User
750W/12V, 1500W/24V
100V(at the lowest temperature)
(Battery voltage +2V) ~ 72V(at 25℃)
Common negative grounding
Rated value: 5A/30VDC, Max. value: 0.5A/60VDC
RS485(5VDC/200mA, Two RJ45 ports in parallel)
Default: 60S, Range:0~999S (0S: the backlight is ON all the time)
Tracer6415AN
12/24/36/48VDC or Auto
23
Tracer6210AN
12/24VDC or Auto
8V ~ 32V
80A/58V
60A
92V(at 25℃)
≥99.5%
98.0%
97.0%
-3mV/℃/2V(Default)
98mA/12V, 60mA/24V
340×232×105.2mm
260×220mm
Φ7mm
2
2AWG/ 35mm
2
6AWG/ 16mm
3.5kg
Tracer6420AN
8V ~ 68V
①