Epever Tracer6210AN User Manual page 20

② Set the battery type via the LCD
①Sealed (Default)
Operation:
On the battery voltage interface, long-press the "ENTER" button until the battery type interface flashes.
Then press the "SELECT" button to change the battery type, and press the "ENTER" button to confirm.
The controller can only set the lead-acid battery type. The lithium battery type must
be set through the PC or APP.
CAUTION
③ Set the battery type via the PC software or APP software

PC software
Connect the controller and the PC through the USB to the RS485 converter, and set the controller's
parameters through the PC software. Please refer to the cloud platform manual for the specific setting.

APP software
Connect the controller and the WIFI module or Bluetooth module through a standard network cable
(parallel cable). The mobile phone APP sets the controller's parameters through the WIFI or Bluetooth
signal. For the specific setting, please refer to the cloud APP manual.
②Gel ③Flooded
16
④ User(Apply to "MT50" and "PC
software "Solar Station Monitor"）