Safety First; Unit Specifications - Kasco EJ Series Operation & Maintenance Manual

SAFETY FIRST

• NEVER enter the water with the electrical equipment connected and/or in operation.
• All electrical equipment must be Ground fault/leakage current protected. Use of a Ground fault
protective device (GFI, RCD, RCBB, or RCBO type device) is required as directed by local and national
codes.
• Stay clear of all moving parts.
• NEVER run the unit out of water. This will damage the equipment and pose a danger to the operator.
• Use extreme caution around water, especially cold water.
• NEVER lift or drag the unit by the power cord. Always use the ropes or mount to remove it from the
water.
• Do not use waders in deep water or in areas with drop-offs, drastic slopes, or soft bottom material.
• Do not use boats that tip easily for unit installation (such as canoes).
• Follow all boating safety rules and regulations, including wearing a Personal Flotation Device.
• The unit is supplied with an internal grounding conductor. To reduce the risk of electrical shock, be
certain that the unit is plugged in/connected to a circuit with ground fault protection.
• Means for disconnection must be incorporated in the fixed wiring, in accordance with local and national
wiring rules.
• Consult a qualified electrician for electrical installation.

UNIT SPECIFICATIONS

Model HP Voltage / Phase / Hz Amperage
2400EJF 1/2
3400EJF 3/4
WARNINGS:
Moving Machinery
OVERVIEW
230 / 1 / 50 2.2
230 / 1 / 50 3.5
WIRE SIZE
10m
2400EJF 1.5mm² 1.5mm²
3400EJF 1.5mm² 1.5mm²
Shock Hazard
Locked Rotor
Suggested Pond
Amps
5.3
9
Cord Length
30m 60m 90m
2.5mm² 2.5mm²
2.5mm² 2.5mm²
SMALL EJ SERIES FOUNTAIN MANUAL
Back to Contents
Min� Depth
Size (m²)
of Operation
1,000 38cm
1,350 45cm
2