Safety First; Unit Specifications - Kasco J Series Operation & Maintenance Manual

SAFETY FIRST

• NEVER enter the water with the electrical equipment connected and/or in operation.
• Stay clear of all moving parts.
• NEVER run the unit out of water. This will damage the equipment and pose a danger to the operator.
• Use extreme caution around water, especially cold water.
• NEVER lift or drag the unit by the power cord. Always use the ropes or mount to remove it from the
water.
• Do not use waders in deep water or in areas with drop-offs, drastic slopes, or soft bottom material.
• Do not use boats that tip easily for unit installation (such as canoes).
• Follow all boating safety rules and regulations, including wearing a Personal Flotation Device.
• The unit is supplied with an internal grounding conductor. To reduce the risk of electrical shock, be
certain that the unit is plugged in/connected to an approved GFCI-protected circuit.
• Means for disconnection must be incorporated in the fixed wiring, in accordance with local and national
wiring rules.
• Consult a qualified electrician for electrical installation.

UNIT SPECIFICATIONS

Model Voltage
3400JF 110-120
3400HJF 208-240
4400JF 110-120
4400HJF 208-240
WARNINGS:
Moving Machinery
Operating Locked Rotor
Amps Amps
Single-Phase Units
7 24
3 12
11 39
6 19
Shock Hazard
Control Panel
Connection
C-25 plug in
Hardwire C-85 Hardwire into C-85
C-25 plug in
Hardwire C-85 Hardwire into C-85
3400 - 4400 J SERIES FOUNTAIN MANUAL
Back to Contents
Unit Connection
Plug into C-25
Plug into C-25
1