Disposal; General; Disposal Of Materials - Atlas Copco XAS 185 CDU T4 Original Instructions Manual

Table of Contents

Advertisement

DISPOSAL

GENERAL

When developing products and services, Atlas Copco tries
to understand, address, and minimize the negative
environmental effects that the products and services may
have, when being manufactured, distributed, and used, as
well as at their disposal.
Recycling and disposal policy are part of the development
of all Atlas Copco products. Atlas Copco company
standards determine strict requirements.
Selecting materials the substantial recyclability, the
disassembly possibilities and the ability of separation of
materials and assemblies are considered as well as the
environmental perils and dangers to health during the
recycling and disposal of the unavoidable rates of not
recyclable materials.
Your Atlas Copco compressor consists for the most part of
metallic materials, that can be re-melted in steelworks and
smelting works and that is therefore almost infinite
recyclable. The plastic used is labelled; sorting and
fractioning of the materials for recycling in the future is
for seen.
This concept can only succeed with your
help.
Support
us
professionally. By assuring a correct
disposal of the product you help to prevent
possible
negative
environment and health, that can occur
with an inappropriate waste handling.
Recycling and re-usage of material helps to
preserve natural resources.

DISPOSAL OF MATERIALS

Dispose contaminated substances and material separately,
according to local applicable environmental legislations.
Before dismantling a machine at the end of its operating
lifetime drain all fluids and dispose of according to the
applicable local disposal regulations.
Remove the batteries. Do not throw batteries into the fire
(explosion risk) or into the residual waste. Separate the
machine into metal, electronics, wiring, hoses, insulation
and plastic parts.
Dispose all components according to the applicable
disposal regulations.
Remove spilled fluid mechanically; pickup the rest with
absorbing agent (for example sand, sawdust) and dispose
it according the applicable local disposal regulations. Do
not drain into the sewage system or surface water.
by
disposing
consequences
for
- 46 -

Advertisement

Table of Contents
loading

Table of Contents