Table of Contents
Advertisement
Frame
The compressor/engine unit is supported by rubber buffers
in the frame. There are mounting bolt holes on the bottom
of the frame to fully mount and support the compressor to
the intended mounting arrangement.
Bodywork
The bodywork has openings at the shaped front and rear
end for the intake and outlet of cooling air. The bodywork
is partially lined with sound-absorbing material.
Lifting eye
A lifting bale is accessible through the roof panel at the top
of the unit.
Control panel
The control panel grouping the air pressure gauge, control
switch etc., is placed at rear of the air compressor.
Serial number
The serial number is mentioned on the data plate.
Data plate
The compressor is furnished with a data plate located on
the air discharge side of the unit showing the compressor
type, product number, serial number, maximum final
pressure and year of manufacture.
- 13 -
Advertisement
Table of Contents
