Disposal; General; Disposal Of Materials - Atlas Copco PTS 800 T3 Cud Instruction Manual

Portable compressors
Table of Contents

Advertisement

9

Disposal

9.1

General

When developing products and services, Atlas Copco
tries to understand, address, and minimize the
negative environmental effects that the products and
services may have, when being manufactured,
distributed, and used, as well as at their disposal.
Recycling and disposal policy are part of the
development of all Atlas Copco products. Atlas
Copco
company
standards
requirements.
Selecting materials the substantial recyclability, the
disassembly possibilities and the separability of
materials and assemblies are considered as well as the
environmental perils and dangers to health during the
recycling and disposal of the unavoidable rates of not
recyclable materials.
Your Atlas Copco compressor consists for the most
part of metallic materials, that can be remelted in
steelworks and smelting works and that is therefore
almost infinite recyclable. The plastic used is
labelled; sorting and fractioning of the materials for
recycling in the future is foreseen.
This concept can only succeed with your
!
help.
professionally. By assuring a correct
disposal of the product you help to
prevent possible negative consequences
for environment and health, that can
occur with an inappropriate waste
handling.
Recycling and re-usage of material helps
determine
strict
to preserve natural resources.
Support
us
by
disposing
- 85 -
9.2

Disposal of materials

Dispose contaminated substances and material
separately,
according
to
environmental legislation.
Before dismantling a machine at the end of its
operating lifetime drain all fluids and dispose of
according the applicable local disposal regulations.
Remove the batteries. Do not throw batteries into the
fire (explosion risk) or into the residual waste.
Separate the machine into metal, electronics, wiring,
hoses, insulation and plastic parts.
Dispose all components according to the applicable
disposal regulations.
Remove spilled fluid mechanically; pick up the rest
with absorbing agent (for example sand, sawdust) and
dispose it according the applicable local disposal
regulations. Do not drain into the sewage system or
surface water.
local
applicable

Advertisement

Table of Contents
loading

Table of Contents