Table of Contents
Advertisement
1) At reference conditions, if applicable, and at normal shaft speed unless otherwise stated.
2) Free Air Delivery (volume flow rate) is measured according to ISO 1217 ed.3 1996 annex D
Tolerance:
•
+/- 5% 25 l/s (53 cfm) < FAD < 250 l/s (530 cfm)
•
+/- 4% 250 l/s (530 cfm) < FAD
The international standard ISO 1217 corresponds to following national standards:
•
American ANSI PTC9
•
British BSI 1571 part 1
•
German DIN 1645 Part 1
•
Swedish SS-ISO 1217
3) Air required for engine and compressor cooling, combustion and for compression.
4) Gross power guaranteed within +/- 5% at SAE J1668 and ISO 3046 conditions:
- 77°F air inlet temperature
- 29.31 in. Hg barometer
- 104°F fuel inlet temperature
- 0.853 fuel specific gravity @ 60°F
5) Measured in accordance with ISO 2151 under free field conditions at 7m distance
- 45 -
Advertisement
Table of Contents
