Table of Contents
Advertisement
Maintenance
Liability
The manufacturer does not accept any liability for any
damage arising from the use of non-original parts and for
modifications, additions or conversions made without the
manufacturer's approval in writing.
Service Packs
A Service Pak is a collection of parts to be used for a
specific maintenance task, e.g. after 250/750, 500 and
after 1000 running hours.
It guarantees that all necessary parts are replaced at the
same time keeping downtime to a minimum.
The order number of the Service Packs are listed in the
Atlas Copco Parts List (ASL).
Use Of Service Packs
Service Packs include all genuine parts needed for normal
maintenance of both compressor and engine.
Service Packs minimize downtime and keep your
maintenance budget low.
Order Service Packs at your local Atlas Copco dealer.
MAINTENANCE SCHEDULE FOR COMPRESSOR
MAINTENANCE SCHEDULE
Service Hours
Service Packs
Engine oil level
Compressor oil level
Air filter Vacuuator valve
Fuel filter water drain
Condensate (4)
Air intake vacuum indicator
Service Kits
A service kit is a collection of parts to fit a specific repair
or rebuilding task.
It guarantees that all necessary parts are replaced at the
same time which improves the uptime of the unit.
These service kits offer the benefits of genuine parts, save
on administration costs and are offered at reduced price,
compared to the loose components
The order numbers of the Service Kits are listed in the
Atlas Copco Parts List (ASL).
Contact Atlas Copco
Storage
Run the compressor regularly, e.g. twice a week, until
warm. Load and unload the compressor a few times to
operate the unloading and regulating components. Close
the air outlet valves after stopping.
If the compressor is going to be stored
without running from time to time,
protective measures must be taken.
Daily
Initial
50hours
Check
Check
Empty
Drain
Drain
Check
- 26 -
Safety Precautions
Preventive Maintenance Schedule
The schedule contains a summary of the maintenance
instructions. Read the respective section before taking
maintenance measures.
When servicing, replace all disengaged packings, e.g.
gaskets, O-rings, washers.
For engine maintenance refer to Engine Operation
Manual.
The maintenance schedule has to be seen as a guideline for
compressors operating in a dusty environment typical to
compressor applications. Maintenance schedule can be
adapted depending on application, environment and
quality of maintenance.
Normal
Bi-Yearly
Or every 250 hours
Or every 500 hours
1310300430
1310312930
Always observe the applicable safety
precautions. See section Safety during
maintenance and repair.
Always keep the machine tidy to prevent
fire hazard.
Unauthorized modifications can result in
injuries or machine damage.
Poor maintenance can void any warranty
claims.
Yearly
Note
Or every 1000 hours
1310312931
Advertisement
Table of Contents
