Digital output, channel 2. FMC130 2x6 socket pinout DOUT 2 Open collector output. Max. 0,5 A DC. +3,8 V output for 1–Wire 1WIRE POWER devices. 1WIRE DATA Data for 1–Wire devices. INPUT 5 RX EXT (LVCAN - RX). Quick Manual v1.2 // FMC130...
INPUT 6 INPUT 5 IBUTTON DIN1 1WIRE DATA DIN2-N/AIN1 1WIRE POWER DIN3/AIN2 DOUT2 DOUT3 DOUT1 FUEL GAUGE +10...30 V DC BUZZER ANALOG POWER SUPPLY STARTER LLS SENSOR DOOR SENSOR 10 - 30V DC CENTRAL LOCK Quick Manual v1.2 // FMC130...
PC CONNECTION (WINDOWS) Power-up FMC130 with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED indications ”. Connect device to computer using Micro-USB cable or Bluetooth connection: • Using Micro-USB cable •...
CONFIGURATION At first FMC130 device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator software. Get the latest Configurator version from here . Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
Page 9
Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured. More details about FMC130 configuration using Configurator can be found in our Wiki wiki.teltonika-gps.com/view/FMC130_Status_info wiki.teltonika-gps.com/view/FMC130_Status_info#GNSS_Info wiki.teltonika-gps.com/view/FMC130_Status_info#GSM_Info wiki.teltonika-gps.com/view/FMC130_Status_info#I.2FO_Info wiki.teltonika-gps.com/view/FMC130_Status_info#Maintenance...
2003 – APN password (if there are no APN password, empty field should be left) SERVER SETTINGS: 2004 – Domain 2005 – Port 2006 – Data sending protocol (0 – TCP, 1 – UDP) Quick Manual v1.2 // FMC130...
Page 11
If device has made a stationary and record ignition is off After successful SMS configuration, FMC130 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator SMS parameters wiki.teltonika-gps.com/view/Teltonika_Configurator...
If the wire is fixed with the bolt, the loop must be connected to the end of the wire. • For better contact scrub paint from the spot where loop is going to be connected. Quick Manual v1.2 // FMC130...
EC21-AUGC: GSM: B2/B3/B5/B8 Blinking fast for a 2G bands Modem activity EC21-EC: GSM: B3/B8 short time EC21-AUGC: WCDMA: B1/B2/B5/B8 Device is not working or Device is in 3G bands boot mode EC21-EC: WCDMA: B1/B8 Quick Manual v1.2 // FMC130...
Page 14
At 12V < 34 mA (nominal) Memory 128MB internal flash memory BLUETOOTH PHYSICAL SPECIFICATION Specification 4.0 + LE Dimensions 65 x 56 x 20,6 mm (L x W x H) teltonika-gps.com/products/accessories 2 wiki.teltonika-gps.com/view/How_to_connect_Bluetooth_Hands_Free_ 3 adapter_to_FMB_device wiki.teltonika-gps.com/view/How_to_connect_OBD_II_Bluetooth_ 4 wiki.teltonika-gps.com/view/FMC130_Sleep_modes Dongle_to_FMB_device 1 Quick Manual v1.2 // FMC130...
DO NOT touch the device before unplugging the power supply. This message contains information on how to operate FMC130 All wireless data transferring devices produce safely. By following these requirements and recommendations, interference that may affect other devices which are you will avoid dangerous situations.
IMEI number. This renders the phone useless on that network and sometimes other All newest certificates may be found in our Wiki networks too, whether or not the phone's subscriber identity module (SIM) is changed. wiki.teltonika-gps.com/view/FMC130_Certification_%26_Approvals Quick Manual v1.2 // FMC130...
Warranty does not apply to any consequential damages. • Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is defective on arrival. • More information on what is RMA wiki.teltonika-gps.com/view/RMA_guidelines Quick Manual v1.2 // FMC130...