System Agent (Sa) Configuration; Me Configuration - DFI CMS630-W480E User Manual

Advanced
X

System Agent (SA) Configuration

InsydeH2O Setup Utility
Advanced
System Agent (SA) Configuration
VT-d <Enabled>
Control Iommu Pre-boot Behavior <Disabled IOMMU>
Above 4GB MMIO BIOS assignment <Disabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
VT-d
Enable or disable VT-d capability
Control Iommu Pre-boot Behavior
Enable or disable dTBT and PCH USB topology IOMMU in Pre-boot environment.
Above 4GB MMIO BIOS assignment
Switch MemoryMappedIO BIOS assignment above 4GB.
User's Manual | CMS630
Rev. 5.0
U S B k e y b o a r d / m o u s e / s t o r a g e
support under UEFI environ-
ment.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
Advanced
X

ME Configuration

InsydeH2O Setup Utility
Advanced
USB Configuration
ME State <Enabled>
ME Unconfig on RTC Clear <Enabled>
Me Fw Image Re-Flash <Disabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
ME State
When this field is set to Disabled, ME will be put into ME Temporarily Disabled Mode.
ME Unconfig on RTC Clear
When disabled, ME will not be unconfigured on RTC Clear.
Me Fw Image Re-Flash
This field is used to enable or disable the flash ME region.
Chapter 3
BIOS SETTINGS
Rev. 5.0
When Disabled ME will be put
into ME Temporarily Disabled
Mode.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
37