Table of Contents
Advertisement
Mounting XV2-2
The XV2-2 units are mounted either by using the ceiling mount, wall mounting or T-bar mounting
method.
Ceiling mount
1. Determine where XV2-2 needs to be mounted and remove the ceiling tile.
2. Using the hole template, mark the hole locations.
3. Drill the holes for the 4 mounting screws using a 5mm (3/6") diameter drill bit.
4. Drill the RJ45 cable hole using a 15 mm (5/8") diameter bit.
5. Hold the mounting plate on the top side of the ceiling tile and screw it on the mounting bracket.
Chapter 2: Packaging and Installation of Access Point
24
Advertisement
Table of Contents
