Table of Contents
Advertisement
Mounting XE3-4
The XE3-4 units are mounted by using one of the following mounting techniques:
Ceiling mount,
l
Wall mounting, or
l
T-bar mounting.
l
Ceiling mount
To mount the XE3-4 unit by using the ceiling mount technique, perform the following steps:
1. Determine a place or location where you want to mount the XE3-4 unit.
2. Remove the ceiling tile.
3. Using the hole template, mark the hole locations.
4. Drill the holes for the four mounting screws using a 5mm (3/6") diameter drill bit.
Chapter 2: Packaging and Installation of Access Point
34
Advertisement
Table of Contents
