Show Vlan Ports Cli Command Enhancement - HP ProCurve J8766A Release Note

MENU
ProCurve Switch 5406zl
===========================- TELNET - MANAGER MODE ===========================
System Name : Blue Switch
System Contact : Bill_Smith
System Location : + characters of the location are missing. It's too long.
Inactivity Timeout (min) [0] : 0
Inbound Telnet Enabled [Yes] : Yes
Time Sync Method [None] : TIMEP
TimeP Mode [Disabled] : Disabled
Tftp-enable [Yes] : Yes
Time Zone [0] : 0
Daylight Time Rule [None] : None
Actions-> Cancel
Cancel changes and return to previous screen.
Use arrow keys to change action selection and <Enter> to execute action.
Figure 8. Menu Screen Showing System Information
Web Browser Interface
The Web Browser interface also allows you to enter a maximum of 255 characters. You can view all
the characters by using the cursor to scroll through the field.

Show VLAN Ports CLI Command Enhancement

The show vlan ports command has been enhanced with an option (detailed) to display VLAN
memberships on a per-port basis when a range of ports is specified in the command. In addition, user-
specified port names will be displayed (if assigned), along with tagged or untagged membership
modes.
Displaying the VLAN Membership of One or More Ports
Switch Configuration - System Information
Edit Save
24-Oct-2006
MAC Age Time (sec) [300] : 300
Web Agent Enabled [Yes] : Yes
Help
Enhancements
Release L.11.08 Enhancements
12:41:47
87