Release L.10.23 Enhancements - HP ProCurve J8766A Release Note

ProCurve(config)# show loop-protect 1-4
Status and Counters - Loop Protection Information
Transmit Interval (sec)
Port Disable Timer (sec) : 5
Loop Detected Trap
Loop
Port Protection
---- ----------- --------- ---------- ---------------- ------------ --------
1 Yes
2 Yes
3 Yes
4 Yes
Figure 29. Example of Show Loop Protect Display

Release L.10.23 Enhancements

Versions L.10.21 and L.10.22 were never released.
Release L.10.23 includes the following enhancements:
Enhancement — Support for the following products was added:
■
• J8768A - ProCurve Switch vl 24-port Gig-T Module
• J9030A - ProCurve Switch 4208vl-72GS 68 10/100/1000 + 4 SFP
• J9033A - ProCurve Switch vl 20-port Gig-T + 4-port SFP Module
• J9064A - ProCurve Switch 4204vl-48GS 44 10/100/1000 + 4 SFP
: 5
: Enabled
Loop Loop
Detected Count
No 0
No 0
No 0
No 0
Time Rx
Since Last Loop Action
send-disable Up
send-disable Up
send-disable Up
send-disable Up
Enhancements
Release L.10.23 Enhancements
Port
Status
63