Problems Resolved in Release L.10.05 (Not a general release)
Crash/SSHv2 (PR_1000320822) — The Switch does not generate SSHv2 keys and may
crash with a message similar to:
TLB Miss: Virtual Addr=0x00000000 IP=0x80593a30 Task='swInitTask'
Task ID=0x821ae330 fp:0x00000000 sp:0x821adfb8 ra:0x800803f0
Web UI (PR_1000302713) — When using the web user interface and a large amount of
stacking interactions occur, portions of the information from the stack commander may no
Problems Resolved in Release L.10.06 (Not a general release)
CLI (PR_1000322029) — The command "show vlans" does not display data correctly in
the status field.
CLI (PR_1000334412) — Operator level can save Manager privilege level changes to the
sFlow Enhancement (PR_1000337714) — Added new "show sflow" commands to the
"Show sFlow Commands" on page 21
Web UI (PR_1000331431) — The QoS Configuration Tab is not working correctly when
using the Web User Interface.
Problems Resolved in Release L.10.07 (Not a general release)
Authentication (PR_1000343377) — When running the Windows XP 802.1X supplicant
and the switch sends a re-authentication, Windows XP prompts the user to re-enter their
username and password again.
Authentication (PR_1000344961) — A port with multiple 802.1X users on it will allow
traffic to pass for a user after that user's supplicant has been stopped.
CLI (PR_1000344362) — The CLI help text was updated in the areas of ip igmp auto,
forward, and blocked.
Software Fixes in Release L.10.01 - L.11.09