Download Print this page

HP ProCurve J8766A Release Note: Release L.10.20

Hp procurve j8766a: release note.
Hide thumbs


Software Fixes in Release L.10.01 - L.11.09

Release L.10.20

Web-UI (PR_1000373711) — Attempting to access the Web UI of a stack member without
being logged on as Manager returns a "404 Page Not Found" error.
NOTE: Versions L.10.12 through L.10.19 were never built. The code branched to L.10.20 with no
intervening releases.
Release L.10.20
Problems Resolved in Release L.10.20
Please refer to
"Release L.10.20 Enhancements"
on the enhancements listed below.
Enhancement (PR_1000336169) — Added support for STP Per Port BPDU Filtering and
SNMP Traps.
Enhancement (PR_1000346164) — When this feature is enabled on a port, the switch will
disable (drop link) a port that receives a spanning tree BPDU, log a message, and optionally
send an SNMP TRAP.
Enhancement (PR 1000313819) — This enhancement allows SNMP configuration of
RADIUS configuration.
Enhancement (PR 1000292455) — Implemented rate display for ports on CLI. New
command: show interface port-utilization. Not available on Menu or Web Interface.
Enhancement (PR_1000311510) — Ping conformance as defined in RFC 2925
Enhancement (PR_1000331027) — TCP/UDP port closure enhancement.
Enhancement (PR_1000330743) — Denial of Service logging enhancement.
Enhancement (PR_1000338847) — Added support for the Advanced Encryption Stan-
dard (AES) privacy protocol for SNMPv3.
Enhancement (PR_1000339546) — Addition of the clear log CLI command
Enhancement (PR_1000374085) — This enhancement expands the use of the Controlled
Directions parameter to also support mac/web authentication
Enhancement (PR_1000376406) — Loop Protection feature additions, including packet
authentication, loop detected trap, and receiver port configuration.
Enhancement (PR_1000358900) — A RADIUS accounting enhancement was made.
Module Hotswap (PR_1000376980) — When a module is hot-swapped, the switch may
crash with a message similar to:
Software exception at buffers.c:2237 -- in 'mPpmgrCtrl',
task ID = 0x33eea88 -> ASSERT: failed
(not a general release)
section beginning on page
for additional details


   Related Manuals for HP ProCurve J8766A

This manual also for:

Procurve 4200vl

Comments to this Manuals

Symbols: 0
Latest comments: