Basic Operation For Ricoh Scan Utility V2; Preparations For Using Ricoh Scan Utility V2; Using Ricoh Scan Utility V2 To Scan To A Computer - Ricoh M C251FW User Manual

Basic Operation for RICOH Scan Utility V2

1. Your Computer (RICOH Scan Utility V2 already installed)
Instruct the machine to start scanning the original that is set on the machine.
2. This Machine
The original that is set on the machine is scanned, and its data is sent to a client computer.

Preparations for Using RICOH Scan Utility V2

This section describes the preparations needed for scanning from RICOH Scan Utility V2.
To use RICOH Scan Utility V2:
• Make sure that the machine connects to the network environment.
• Configure the network settings under [Network Settings].
• Install RICOH Scan Utility V2.
To use the USB port, install the TWAIN driver and WIA driver in advance. Download the latest drivers
from the manufacturer's website.

Using RICOH Scan Utility V2 to Scan to a Computer

1. Place originals.
2. On the [Start] menu, click [C311_C251 series Software Utilities].
3. Click [RICOH Scan Utility V2 for M C251FW].
RICOH Scan Utility V2 starts.
4. Click [Select Machine], and then select the scanner you want to use.
Select the scanner by specifying the IP address or pressing [Search Network Scanner], and then
select from the list displayed.
Basic Operation for RICOH Scan Utility V2
DUE297
151