Table of Contents
Advertisement
Problem
White lines appear.
DAC607
Horizontal lines appear on the
printed paper.
The print color is different from the
color specified.
Photo images are coarse.
The intermediate transfer belt is dirty.
Follow the procedure below to clean the belt:
1. Open the top cover while the power is on.
2. Remove all print cartridges from the printer.
3. The machine automatically starts cleaning. Once
cleaning is complete, the error message "Toner Set Error:
(X)" appears ("X" indicates the toner color).
4. When cleaning finishes, open the top cover and attach
all the print cartridges again.
If this procedure does not resolve the problem, the exposure
glass or ADF may be stained. Perform cleaning according to
page 342 "Cleaning the Exposure Glass" and page 343
"Cleaning the Auto Document Feeder". If the lines remain even
after cleaning, contact your service representative.
• Impact can cause lines to appear on printed paper and
other malfunctions.
Protect the printer from impact at all times, especially
while it is printing.
• If lines appear on prints, turn the printer off, wait a few
moments, and then turn it back on again. Then, perform
the print job again.
If a specific color is missing, turn the power switch off and on.
If this does not resolve the problem, contact your sales or
service representative.
Some applications lower the resolution for making prints.
Printer Problems
Solution
379
Advertisement
Table of Contents
Troubleshooting
