Ricoh M C251FW User Manual page 355

Message
Network is not Ready A scanned file could not be sent
because the machine has not
received IP address information
from the DHCP server
completely.
On Hook or Stop key The machine has been off-hook
for an extended period of time.
Out of Paper: X The indicated tray has run out of
paper.
Restarting machine... The machine needs to be
restarted.
Remove Paper: The machine failed to proceed
with the print job, because tray
Bypass Tray
1 or Tray 2 was specified as the
input tray but paper was set in
the bypass tray.
Replace Intermediate The transfer belt is no longer
Transfer Belt usable, and must be replaced.
Rpl Rqrd Soon: Print The print cartridge is almost
Cart. (X) empty.
ReplaceRequiredSoo The waste toner bottle needs to
n:Waste Tnr. Btl. be replaced soon.
Replacement The fusing unit is no longer
Required: Fusing Unit usable, and must be replaced.
Replacement The paper feed roller is no
Required:Ppr Feed longer usable, and must be
Roller replaced.
Repl Rqrd: Print Cart. The machine has run out of
(X) toner.
Replacement The transfer roller is no longer
Required:TransferRoll usable, and must be replaced.
er
Causes
Wait until the machine receives the IP
address information completely, and then
try the operation again.
Put down the handset phone or press the
[Clear/Stop] key.
Load paper to the indicated tray. See
page 48 "Loading Paper".
Turn off the power, and then turn it back
on.
Remove paper from the bypass tray.
Contact your sales or service
representative.
Prepare a new print cartridge.
Prepare a new waste toner bottle.
Contact your sales or service
representative.
Contact your sales or service
representative.
Replace the print cartridge. See page 321
"Replacing the Print Cartridge".
Contact your sales or service
representative.
Error and Status Messages on the Screen
Solutions
353