Table of Contents
Advertisement
5. Scanning Originals
6. Auto Selection: (This appears only if [Use Custom Size] is checked.)
• Detect Separate Items
You can scan multiple originals together and store each scan image as a separate file.
• Detect Enclosing Box
You can scan multiple originals placed on the exposure glass and store their scan images as a single file.
7. Scan to:
Select where to store the scan data.
8. Name:
Name the scan data.
9. Format:
Select the format of the scan data.
• JPEG
• HEIC
• TIFF
• PNG
• JPEG 2000
• GIF
• BMP
• PDF
10. Image Correction:
By selecting [Manual], you can adjust settings such as brightness and contrast.
11. Scan
Click to start scanning.
12. Overview (This appears only if [Scan Mode:] is set to [Flatbed].)
Click to preview the scan image.
13. Hide Details
Click to hide the settings.
• If the scan data is larger than the memory capacity, an error message appears and scanning is
canceled. If this happens, specify a lower resolution and scan the original again.
• [Duplex] appears only when you select [Document Feeder] in [Scan Mode:]. Select the check box
when scanning both sides of the original. If you select the check box, the screen will display settings
in which you can specify the orientation for both sides in duplex printing.
• [Orientation] appears only when you select [Document Feeder] in [Scan Mode:]. Specify the
image rotation.
162
Advertisement
Table of Contents
Troubleshooting
