Ricoh M C251FW User Manual page 305

Admin Account
Item
User Name
(Required)
Security Settings
Authentication
Algorithm
Authentication
Password
(Required)
Encryption Algorithm
Encryption Password
(Required)
MIB Access Type
SNMPv3 Trap
Item
SNMPv3 Trap
Enter the user name for logging in to the SNMPv3. Can contain up to 32
characters.
Specify the user account security setting by selecting one of the following:
[Authentication Encryption]: It is necessary to specify [Authentication
Algorithm], [Authentication Password], [Encryption Algorithm], and
[Encryption Password].
[Authentication Non-Encryption]: It is necessary to specify [Authentication
Algorithm] and [Authentication Password]. [Encryption Algorithm] and
[Encryption Password] cannot be specified.
[Non-Authentication Non-Encryption]: [Authentication Algorithm],
[Authentication Password], [Encryption Algorithm] and [Encryption
Password] cannot be specified.
Specify the authentication algorithm from the following:
[MD5], [SHA1], [SHA224], [SHA256], [SHA384], [SHA512]
Enter a password for the Admin account. Can contain up to 32 characters.
Specify the encryption algorithm from the following:
[AES128], [DES]
Enter a password for encrypting the Admin account password.
Can contain up to 32 characters.
Select an access type for the administrator account to access MIB from the
following:
[read-only], [write-only], [read-write], [Not-Accessible]
Select whether to enable the machine to send SNMPv3 traps to the
management host (NMS).
When disabled, [SNMPv3 Management Host 1] and [SNMPv3
Management Host 2] below become unavailable.
Configuring the Network Settings
Description
Description
303