Table of Contents
Advertisement
Insert and remove a
USB stick step-by-
step
4.7
Description
38
16544_001
The USB stick is inserted into the USB host port inside the Commu-
☞
nication side cover of the instrument.
1.
Turn the knob on the Communication side cover to the vertical posi-
tion to unlock the communication compartment.
2.
Open the lid of the communication compartment to access the com-
munication ports.
3.
Slide the USB stick with the Leica logo facing you firmly into the USB
host port until it clicks into position.
☞
Do not force the USB stick into the port.
To remove the USB stick, slide the USB stick out of the
port.
4.
If desired, store the lid of the USB stick on the underside of the
compartment lid.
5.
Close the lid and turn the knob to the horizontal position to lock the
compartment.
Connecting to a Personal Computer
Windows Mobile Device Center for PC with Windows 7/Windows 8/Windows 10
operating system is the synchronization software for Windows mobile-based
pocket PC. WMDC enables a PC and a Windows mobile-based pocket PC to
communicate.
Leica USB drivers support Windows 7, Windows 8 (8.1) and Windows 10 oper-
ating systems.
Cables
Leica USB drivers support:
Name
Description
GEV223
USB data cable, 1.8 m, connects instrument to Mini-USB to USB
GEV234
USB data cable, 1.65 m, connects CC to iCG or CC to PC (USB)
GEV261
Y-cable, 1.8 m, connects instrument to PC – battery
Operation
Advertisement
Table of Contents
