Connecting Tps Instrument And Cs Field Controller - Leica Geosystems Viva TPS Getting Started Manual

Viva TPS, SmartWorx Viva and Principles
2.3
Connecting TPS
instrument and CS
field controller
setup step-by-step

Connecting TPS instrument and CS field controller

Step Description
1. Set up your TPS instrument. Refer to "1.2 Setting Up the TPS Instrument".
2. Fix either a hand strap to your CS field controller or fix your CS field controller
to a holder and pole.
3. Turn on your TPS instrument and your CS field controller.
Ensure that your TPS instrument is ready for remote control. The
RCS mode is only available for the CS15 field controller while the
GeoCOM mode is available for all CS field controllers.
4. Start the SmartWorx Viva software. Refer to "2.1 SmartWorx Viva".
Select Main Menu: Instrument\Instrument connections\TPS connection
5.
wizard to start the TPS connection wizard. For detailed descriptions, please
refer to the Viva Series Technical Reference Manual.
Follow the TPS connection wizard and connect your TPS instrument to your
6.
CS field controller.
40