Laser Plummet; Electromagnetic Compatibility (Emc) - Leica Geosystems iCON iCT30 User Manual

Construction layout tool
Table of Contents

Advertisement

1.6.8
General
1.7
Description
Safety Directions

Laser Plummet

The laser plummet built into the product produces a visible red laser beam
which emerges from the bottom of the product.
The laser product described in this section is classified as laser class 2 in
accordance with:
IEC 60825-1 (2014-05): "Safety of laser products"
These products are safe for momentary exposures but can be hazardous for
deliberate staring into the beam. The beam may cause dazzle, flash-blindness
and after-images, particularly under low ambient light conditions.
Description
Wavelength
Maximum average radiant power
Pulse duration– cw (continuous wave)
Pulse repetition frequency (PRF)
Beam divergence
CAUTION
Class 2 laser product
From a safety perspective, class 2 laser products are not inherently safe for
the eyes.
Precautions:
Avoid staring into the beam or viewing it through optical instruments.
Avoid pointing the beam at other people or at animals.
a
b
19133_001

Electromagnetic Compatibility (EMC)

The term Electromagnetic Compatibility is taken to mean the capability of the
product to function smoothly in an environment where electromagnetic radi-
Value
640 nm
0.95 mW
10 ms
1 kHz
<1.5 mrad
a
Exit for laser
beam
b
Laser beam
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icon icb50Icon icb70

Table of Contents