Table of Contents
Advertisement
4.4.2
Change battery step-
by-step
4.5
Power functions
36
Battery for the iCT Instrument
16542_001
1.
Face the instrument so that the vertical drive screw is on the left.
The battery compartment is below the vertical drive. Turn the knob
to the vertical position, opening the lid of the battery compartment.
2.
Pull out the battery housing.
3.
Pull the battery out of the battery housing.
4.
☞
At the top of the battery is a notch which corresponds to
the inner surface of the battery housing. This notch helps
you to place the battery correctly.
Place the battery into the battery housing, ensuring that the con-
tacts are facing outward. Click the battery into position.
5.
Place the battery housing into the battery compartment. Push the
battery housing in until it fits completely into the battery compart-
ment.
6.
Turn the knob to lock the battery compartment. Ensure that the
knob is returned to its original horizontal position.
Power Functions
Option
Key
Turn on
ON/OFF
Turn off
ON/OFF
Description
Press and hold for 2 s.
☞
The instrument must have a power
supply.
Press and hold for 2 s.
☞
For instruments set up in perman-
ent installations with external
power sources, for example monit-
oring, ensure external power
remains available until the instru-
ment has successfully completed
the power down process.
Operation
Advertisement
Table of Contents
