Description Of The System; System Components - Leica Geosystems iCON iCT30 User Manual

2
2.1
Main Components
Terms and abbrevi-
ations

Description of the System

Description of the System

System Components

iCT30
19134_001
Component
iCT30 instrument
CC80 field controller
The following terms and abbreviations can be found in this manual:
Term Description
EDM Electronic Distance Measurement
EDM refers to the laser distancer incorporated into the
instrument which enables distance measurement.
Two measuring modes are available:
•
•
PinPoint PinPoint R80 refers to the Reflectorless EDM technology
which enables an increased measuring range with a
smaller laser spot size.
ATR Automatic Target Aiming.
ATR refers to the instrument sensor which enables the
automatic target aiming and locking.
AutoSearch AutoSearch refers to the instrument sensor which
enables the automatic rapid finding of a prism.
Communication- The CCD6 CommunicationHandle is an instrument carry
Handle CCD6 handle with an integrated radio modem with attached
antenna.
Communication Communication side cover with integrated Bluetooth,
side cover SD card slot and USB port is standard for a iCT30 instru-
ment.
Setup Pilot A method to carry out the setup of the iCT30 to a num-
ber of existing control points in a fully automated way.
CC80
Description
a layout tool for measuring, calculating and cap-
•
turing data.
combined with the multi-purpose construction
•
field controller to conduct remote control sur-
veys.
A multipurpose field controller allowing the remote
control of the iCT30 via Bluetooth.
Prism mode. This mode refers to the ability to
measure distances to prisms.
Reflectorless mode. This mode refers to the ability
to measure distances without prisms.
21