Table of Contents
Advertisement
2
2.1
General
2.2
Main components
Interface
☞
LED indicators
14
Description of the System
Overview
a
19115_001
System Components
The iCON gps 30 represents the so called instrument.
Component
Integrated antenna
Bluetooth
Battery
LEDs
LEMO-1 connector
5/8" Whitworth
thread
a
b
19116_001
Do not open the instrument or remove any connector as this action impairs
the protection against water, dust and sand. Open the instrument for battery
handling without exception in dry and clean conditions only.
Description
The iCON gps 30 instrument has Light Emitting Diode indicators. They indicate
the basic instrument status.
b
Description
Receiving signals from a GNSS (Global Navigation
Satellite System).
To wireless pair with iCON field controller
The battery compartment holds the GEB212 battery
for power supply.
Indication of power, Bluetooth and signal reception.
Serial by RS232 or USB communication.
Mounting the instrument for observation.
c
d
e
f
g
Description of the System
a
Antenna iCON
iCG30
b
CC70/CC80 Field
Controller
a
Lemo connector
b
5/8" Whitworth thread,
for instrument mount-
ing
c
Tracking LED
d
Bluetooth LED
e
Power LED
f
ON/OFF key
g
Battery compartment
Advertisement
Table of Contents
