3.4.4
WATT - Watt Controlled Program
1.
Hold RESET for three seconds, select the user and enter data. Alternatively press RESET to return
to the main menu.
2.
Select the WATT mode with +/- buttons and confirm with MODE (see fig. 27).
3.
Enter the target value in Watt with +/- buttons and confirm with MODE (see fig. 28).
4.
Enter TIME, DISTANCE, CALORIES and target PULSE values. Confirm with MODE (see fig. 29-32).
5.
Press START to begin the training. Watt can be adjusted through +/- buttons.
6.
Press STOP to stop the training. Press RESET to return to the main menu or hold for three seconds
to get to the standby mode.
Figure 27
Figure 29
Figure 31
30
Figure 28
Figure 30
Figure 32
EX60
Need help?
Do you have a question about the EX60 and is the answer not in the manual?