Memory 1 - HP DesignJet 230 Service Manual

Interfaces
The plotters operate with a variety of computer systems through either the serial, RS 232 C
port or the parallel, Bi Tronics, extended capability port (ECP).
An autoswitching feature enables the plotter to detect from which interface it is receiving
data, so you can send data through either interface without having to change the plotter
settings. (More on interfaces ' chapter 5, w Input/Output Interfaces.)
Network Connections
You can connect the plotters to a network through an optional HP JetDirect EX or
HP JetDirect EX Plus3 external print server. The range of network operating systems that
are supported are as follows:
Local Area Network
Ethernet
Token Ring
The print server includes a network autoswitching feature and can detect from which
network it is receiving data. This enables you to send data through different networks
without having to change the interface settings.
Memory
The plotters have a standard 4 megabytes of on board random access memory (RAM). They
also have one RAM expansion socket, which can hold an optional 4 , 8 , 16 or 32 megabyte,
single in line memory module (SIMM). The maximum RAM is 36 MB.
Accuracy
The accuracy of the plotters in drawing a vector is
specified vector length, whichever is greater, at 23
HP Inkjet 0.012 cm (0.0048 inch) polyester film.
C4699 90000
Network Operating System
Novell Netware
LAN Manager
TCP/IP
TCP/IP
EtherTalk
Novell Netware
LAN Manager
TCP/IP
"
0.38 mm (0.015 in) or
_
C (73
Computer Operating System
DOS, Windows
DOS, Windows
HP-UX, Sun OS, Solaris
IBM AIX
Macintosh, Apple Products
DOS, Windows
DOS, Windows
HP-UX, Sun OS, Solaris, IBM AIX
"
0.2% of the
_
F) at 50 60% relative humidity, on
Product Information 1 3