Supermicro SuperServer 5019C-WR User Manual page 72

SuperServer 5019C-WR User's Manual
Super IO Configuration

The following Super IO information will display:
•
Super IO Chip AST2500
Serial Port 1 Configuration
This submenu allows the user to configure the settings of Serial Port 1.
Serial Port
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This item displays the status of a serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=2F8h; IRQ=4), (IO=3E8h;
IRQ=4), and (IO=2E8h; IRQ=4).
Serial Port 2 Configuration
This submenu allows the user to configure the settings of Serial Port 2.
Serial Port
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This item displays the status of a serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 2 are Auto, (IO=3F8h; IRQ=3), (IO=2F8h; IRQ=3), (IO=3E8h;
IRQ=3), and (IO=2E8h; IRQ=3).
72