Texas Instruments C2000 F28003x Series User Manual page 8

Software Development
5. Run CCS on the PC.
6. Import a F28003x project from C2000WARE, or another installed software package, into the CCS
workspace.
7. Add the _LAUNCHXL_F280039C predefined symbol to the imported DriverLib example project in order for
the software to use relevant F28003x LaunchPad signals.
a. Open the projects Properties → Expand the Build tab → Expand the C2000 Compiler tab → Select
Predefined Symbol → Add _LAUNCHXL_F280039C pre-define NAME.
8. Right click the project name and select Rebuild Project in CCS.
9. Launch the LAUNCHXL-F280039C Target Configuration file and connect to the F28003x device. Ensure that
the Target Configuration file is configured to use the 2-pin cJTAG advanced configuration. For additional
details, see FAQ section.
10. Click 'Load Program' and select the program's binary to load. The binary will be loaded onto the device and
can now be run and debugged.
™
8 C2000 F28003x Series LaunchPad
™
Development Kit
Copyright © 2022 Texas Instruments Incorporated
www.ti.com
SPRUJ31 – APRIL 2022
Submit Document Feedback