Table of Contents
Advertisement
www.ti.com
Table 1-2. Featured BoosterPacks for the F28003x LaunchPad (continued)
BoosterPack/Board
BOOSTXL-BUCKCONV
BOOSTXL-POSMGR
BOOSTXL-SHARP128
Software support for the BoosterPacks and boards listed will vary.
Users can also design their own BoosterPacks for the F28003x LaunchPad. Ensure that compatibility
requirements are met by referencing the signal pin mapping in the
LAUNCHXL-F280039C
Schematic.
1.6 Hardware Revisions
This section contains an abbreviated revision history of the LAUNCHXL-F280039C as well as known issues with
each revision.
1.6.1 Revision A
The first production revision of the LAUNCHXL-F280039C was released in April 2022. This revision can be
identified by the "MCU103A" silkscreen labeling on the back side of the EVM between the BoosterPack
Connector site 1 towards the top of the board.
Issues and concerns that have been identified on the EVM are listed below:
Known issues:
•
No issues to report at this time of initial release.
Special notes and considerations to be aware of:
•
Nothing to report at this time of initial release.
2 Software Development
This section provides general information about software development, as well as instructions for programming
the LaunchPad. Software tools and packages for C2000 real-time controllers, like the F28003x, are listed in the
C2000 Evaluation & Development
2.1 Software Tools and Packages
Code Composer Studio (CCS)
Microcontroller and Embedded Processors portfolio. Code Composer Studio
environment for developing, programming, and debugging code on the C2000 family of MCUs.
C2000WARE
is a repository of device-specific drivers, bit-field support files, libraries, peripheral examples,
utilities, hardware files, and documentation for C2000 MCUs. C2000WARE provides a solid foundation to
begin development and evaluation of the F28003x device on the LAUNCHXL-F280039C and minimize software
development time.
Software Development Kits (SDKs) are provided to make it easy to evaluate C2000 MCUs within specific system
use cases and reduce overall development time. The
SDK)
is targeted for various motor control applications, such as industrial drives. The
(C2000WARE-DIGITALPOWER-SDK)
DC-DC and DC-AC power supply applications.
SPRUJ31 – APRIL 2022
Submit Document Feedback
Application and Usage
Digital Power Buck Converter BoosterPack for learning the basics of digital power
control with C2000 microcontrollers. The buck converter power stage supports
dynamic loads and converts an external 9-VDC power supply to a configurable DC
output voltage.
PositionManager BoosterPack is a flexible low voltage platform intended for
evaluating interfaces to absolute encoders and analog sensors like resolvers and
SinCos transducers.
Sharp® 128x128 Memory LCD and microSD Card BoosterPack, controlled using
SPI. Display sensor readings, time, graphics, or other information using the LCD
screen.
Note
page.
is a free integrated development environment (IDE) that supports TI's
Motor Control SDK (C2000WARE-MOTORCONTROL-
is targeted for digital power system development for various AC-DC,
Copyright © 2022 Texas Instruments Incorporated
LAUNCHXL-F280039C Pinout Map
™
(CCS) provides a feature rich
Digital Power SDK
™
C2000
F28003x Series LaunchPad
Board Overview
or
™
Development Kit
5
Advertisement
Table of Contents
