Table of Contents
Advertisement
www.ti.com
1 Board Overview
1.1 Kit Contents
The F28003x Series LaunchPad Development Kit contains these items:
•
C2000 F28003x Series LaunchPad development board (LAUNCHXL-F280039C)
•
USB Type-A male to USB Type-C™ male cable
•
Pinout Map
1.2 Features
The F28003x LaunchPad has these features:
•
C2000 Series F280039CPNS (100-pin) microcontroller:
– With Configurable Logic Block (CLB) capability
•
On-board XDS110 debug probe
•
Two user-controlled LEDs
•
One microcontroller reset switch
•
Selectable power domains:
– USB (isolated)
– BoosterPack
– External power supply
•
CAN connector with on-board CAN transceiver
– Supports both standard CAN (DCAN) and CAN-FD (MCAN)
•
Two independent Enhanced Quadrature Encoder Pulse (QEP)-based encoder connectors
•
FSI peripheral connector
•
Two independent BoosterPack XL standard connectors (80-pins) featuring stackable headers to maximize
expansion through the BoosterPack ecosystem
1.3 Specifications
Table 1-1
summarizes the F28003x LaunchPad specifications.
Parameter
Board Supply Voltage
Dimensions
Break-out Power Output
Assumed Operating Conditions
SPRUJ31 – APRIL 2022
Submit Document Feedback
Table 1-1. LAUNCHXL-F280039C Specifications
Value
5 V
from one of the following sources:
DC
•
USB Connector (USB101) - USB Type-C™ cable connected to PC or other compatible
power source.
•
BoosterPack 1
•
BoosterPack 2
•
Auxiliary power connectors
5.5 in x 2.3 in x .425 in (13.97 cm x 5.84 cm x 10.8 mm) (L x W x H)
•
3.3 V
to BoosterPacks, limited by output of TPS7A3701 LDO. This 3.3-V plane is
DC
shared with on-board components. Total output power limit of TPS7A3701 is 1 Amp.
This kit is assumed to run at standard room conditions. The EVM should run at
approximately standard ambient temperature and pressure (SATP) with moderate-to-low
humidity.
Copyright © 2022 Texas Instruments Incorporated
™
C2000
F28003x Series LaunchPad
Board Overview
™
Development Kit
3
Advertisement
Table of Contents
