Table of Contents
Advertisement
3.10 Installing Windows 7 from USB 3.2 Gen 1 Drives
Microsoft Windows 7 installation media does not include native driver support for USB 3.2
Gen 1, so during installation, a keyboard/mouse connected to a USB 3.2 Gen 1 port does
not respond. The Windows 7 USB 3.0 Creator Utility automates the steps to update a
Windows 7 installation image so that it contains USB 3.2 Gen 1 drivers. To install
Windows 7 from a USB drive onto the UPC-F12C-ULT3, please follow the steps described
below.
Step 1:
Create a USB flash drive installer. Use your Windows 7 DVD or ISO image to
create a bootable USB flash drive. Instructions on how to do are found on
Microsoft's
Step 2:
Download and unzip the
on the Admin system.
Step 3:
Connect the USB device containing the Windows 7 image to the Admin system.
Step 4:
Right-click the file "Installer_Creator.exe" and select Run as administrator.
Step 5:
Browse to the root of the USB drive.
Step 6:
Click "Create Image" to begin the creation process.
Step 7:
Wait for the process to finish. It can take up to 15 minutes.
Step 8:
Using the updated installer, proceed with the Windows 7 installation as you
normally would.
Page 28
website.
Windows 7 USB 3.0 Creator utility
UPC-F12C-ULT3 Panel PC
to a temporary folder
Advertisement
Table of Contents
