R&S RTC1002 Getting Started page 14

®
R&S RTC1000
Risk of electric shock
The fuse is part of the main power supply. Therefore, handling the fuse
while power is on can lead to electric shock. Before opening the fuse
holder, make sure that the instrument is switched off and disconnected from
all power supplies.
Always use fuses supplied by Rohde & Schwarz as spare parts, or fuses of
the same type and rating.
1. Pull the fuse holder out of its slot on the rear panel.
2. Exchange the fuse.
3. Insert the fuse holder carefully back in its slot until it latches.
Getting Started 1335.7346.02 ─ 06
Preparing for Use
Replacing the Fuse
14