Ads86Xxevm-Pdk Initial Setup; Default Jumper Settings; Ads86Xxevm Default Jumper Settings - Texas Instruments ADS86 EVM-PDK Series User Manual

ADS86xxEVM-PDK Initial Setup

6 ADS86xxEVM-PDK Initial Setup
This section presents the steps required to setup the ADS86xxEVM-PDK kit prior to operation.
6.1

Default Jumper Settings

Figure 4 details the default jumper settings.
12
ADS86xxEVM-PDK Evaluation Module
Table 13
Figure 4. ADS86xxEVM Default Jumper Settings
Copyright © 2015, Texas Instruments Incorporated
provides the configuration for these jumpers.
SBAU245A – June 2015 – Revised July 2015
www.ti.com
Submit Documentation Feedback