Table of Contents
Advertisement
www.ti.com
7.8
ADS86xxEVM GUI Simulation Mode
The ADS86xxEVM GUI can be run in simulation mode by unchecking the Connect to Hardware check-box
on the top right side of the GUI window. In simulation mode, the GUI does not connect to the
ADS86xxEVM board and only displays the results for one set of captured data stored in the computer.
Figure 29
shows the ADS86xxEVM GUI running in simulation mode.
SBAU245A – June 2015 – Revised July 2015
Submit Documentation Feedback
Figure 29. Simulation Mode
Copyright © 2015, Texas Instruments Incorporated
ADS86xxEVM-PDK Kit Operation
ADS86xxEVM-PDK Evaluation Module
31
Advertisement
Table of Contents
