Windows 7 Driver Installation Warning; Installation Wizard Screen; Simple Capture Card Device Driver Completion - Texas Instruments ADS86 EVM-PDK Series User Manual

ADS86xxEVM-PDK Initial Setup
6.2.4 Complete the Simple Capture Card Device Driver Installation
During installation of the simple capture card device driver, a prompt may appear with the Windows
security message shown in
required for proper operation of the software. The drivers contained within the installers are safe for
installation in your system.
NOTE: Driver installation prompts do not appear if the simple capture card device driver is already
installed on your system.
Following are the steps required to install the simple capture card device driver.
1. Immediately after the ADS86xxEVM software installation is complete, prompts appear to install the
simple capture card device driver; see
2. A computer restart may be required to finish the software installation. If prompted, restart the computer
to complete the installation.
Figure 14. Installation Wizard Screen
18
ADS86xxEVM-PDK Evaluation Module
Figure 13. Select Install this driver software anyway to install the driver
Figure 13. Windows 7 Driver Installation Warning
Figure 14
Copyright © 2015, Texas Instruments Incorporated
and Figure 15.
Figure 15. Simple Capture Card Device Driver
Completion
SBAU245A – June 2015 – Revised July 2015
www.ti.com
Submit Documentation Feedback