Advertisement

Quick Links

ADS867x 14-Bit, 500-kSPS, 4- and 8-Channel, Single-Supply, SAR ADCs with
1 Features
14-Bit ADCs with Integrated Analog Front-End
1
4-, 8-Channel MUX with Auto and Manual Scan
Channel-Independent Programmable Inputs:
– ±10.24 V, ±5.12 V, ±2.56 V, ±1.28 V, ±0.64 V
– 10.24 V, 5.12 V, 2.56 V, 1.28 V
5-V Analog Supply: 1.65-V to 5-V I/O Supply
Constant Resistive Input Impedance: 1 MΩ
Input Overvoltage Protection: Up to ±20 V
On-Chip, 4.096-V Reference with Low Drift
Excellent Performance:
– 500-kSPS Aggregate Throughput
– DNL: ±0.2 LSB; INL: ±0.25 LSB
– Low Drift for Gain Error and Offset
– SNR: 85 dB; THD: –100 dB
– Low Power: 65 mW
AUX Input → Direct Connection to ADC Inputs
ALARM → High and Low Thresholds per Channel
SPI™-Compatible Interface with Daisy-Chain
Industrial Temperature Range: –40°C to 125°C
TSSOP-38 Package (9.7 mm × 4.4 mm)
Block Diagram
AVDD
1 M:
AIN_0P
OVP
2nd-Order
PGA
AIN_0GND
LPF
OVP
1 M:
V
B0
1 M:
AIN_1P
OVP
2nd-Order
PGA
AIN_1GND
LPF
OVP
1 M:
V
B1
1 M:
AIN_2P
OVP
2nd-Order
PGA
AIN_2GND
LPF
OVP
1 M:
V
B2
1 M:
AIN_3P
OVP
2nd-Order
PGA
AIN_3GND
LPF
OVP
1 M:
V
B3
1 M:
AIN_4P
OVP
2nd-Order
PGA
AIN_4GND
LPF
OVP
1 M:
V
B4
1 M:
AIN_5P
OVP
2nd-Order
PGA
AIN_5GND
LPF
OVP
1 M:
V
B5
1 M:
AIN_6P
OVP
2nd-Order
PGA
AIN_6GND
LPF
OVP
1 M:
V
B6
1 M:
AIN_7P
OVP
2nd-Order
PGA
AIN_7GND
LPF
OVP
1 M:
V
B7
AUX_IN
AUX_GND
AGND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Sample &
Product
Buy
Folder
Bipolar Input Ranges
DVDD
ADS8678
ADC
ADS8674
Driver
ADC
Driver
Digital
ADC
Logic
Driver
and
CS
Interface
SCLK
ADC
Driver
SDI
SDO
14-Bit
ADC
Driver
SAR ADC
DAISY
REFSEL
ADC
Oscillator
Driver
RST/PD
ALARM
ADC
REFCAP
Driver
REFIO
ADC
Driver
4.096-V
Reference
DGND
REFGND
Tools &
Technical
Software
Documents
2 Applications
Power Automation
Protection Relays
PLC Analog Input Modules
3 Description
The ADS8674 and ADS8678 are 4- and 8-channel,
integrated data acquisition systems based on a 14-bit
successive approximation (SAR) analog-to-digital
converter (ADC), operating at a throughput of
500 kSPS. The devices feature integrated analog
front-end circuitry for each input channel with
overvoltage protection up to ±20 V, a 4- or 8-channel
multiplexer with automatic and manual scanning
modes, and an on-chip, 4.096-V reference with low
temperature drift. Operating on a single 5-V analog
supply, each input channel on the devices can
support true bipolar input ranges of ±10.24 V,
±5.12 V, ±2.56 V, ±1.28V and ±0.64V, as well as
unipolar input ranges of 0 V to 10.24 V, 0 V to 5.12 V,
0 V to 2.56 V and 0 V to 1.28 V. The gain of the
analog front-end for all input ranges is accurately
trimmed to ensure a high dc precision. The input
range
selection
independent for each channel. The devices offer a
1-MΩ constant resistive input impedance irrespective
of the selected input range.
The ADS8674 and ADS8678 offer a simple SPI-
compatible serial interface to the digital host and also
support daisy-chaining of multiple devices. The digital
supply operates from 1.65 V to 5.25 V, enabling
direct interface to a wide range of host controllers.
Device Information
PART NUMBER
ADS867x
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Gain Error versus Temperature
0.05
0.03
0.01
-0.01
-0.03
-0.05
±40
Support &
Reference
Community
Design
ADS8674, ADS8678
SBAS627 – JULY 2015
is
software-programmable
(1)
PACKAGE
BODY SIZE (NOM)
TSSOP (38)
9.70 mm × 4.40 mm
---- ± 2.5*V
---- “ 1.25*V
REF,
REF
---- “ 0.625*V
------“0.3125*V
REF,
REF
-------“0.156 V
---- + 2.5*V
REF,
REF
---- + 1.25*V
---- + 0.625*V
REF,
REF
---- + 0.3125*V
REF
26
59
92
±7
o
Free-Air Temperature (
C)
and
125
C039

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADS867 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments ADS867 Series

  • Page 1 Sample & Support & Reference Product Tools & Technical Community Design Folder Software Documents ADS8674, ADS8678 SBAS627 – JULY 2015 ADS867x 14-Bit, 500-kSPS, 4- and 8-Channel, Single-Supply, SAR ADCs with Bipolar Input Ranges 1 Features 2 Applications • 14-Bit ADCs with Integrated Analog Front-End •...
  • Page 2: Table Of Contents

    8.1 Overview ..............13 Mechanical, Packaging, and Orderable 8.2 Functional Block Diagram ........Information ............8.3 Feature Description..........4 Revision History DATE REVISION NOTES July 2014 Initial release. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 3: Pin Configuration And Functions

    Analog input Auxiliary input channel: positive input. Decouple with AUX_GND on pin 11. AUX_GND Analog input Auxiliary input channel: negative input. Decouple with AUX_IN on pin 10. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 4 Active high alarm output Digital output Data output for serial communication SCLK Digital input Clock input for serial communication Digital input Active low logic input; chip-select signal Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 5: Specifications

    °C/W Junction-to-case (bottom) thermal resistance °C/W θJC(bot) (1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 6: Electrical Characteristics

    (C) Typical value only for information, provided by design simulation. (2) Ideal input span, does not include gain or offset error. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 7 (3) LSB = least significant bit. (4) This parameter is the endpoint INL, not best-fit INL. (5) FSR = full-scale range. (6) Does not include the shift in offset over time. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 8 (9) Memory crosstalk is measured by applying a full-scale sinusoidal signal up to 10 kHz to a channel that is selected in the multiplexing sequence, and measuring its effect on the output of the next selected channel for all combinations of input channels. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 9 Only for SDO µA Internal pin capacitance TEMPERATURE RANGE Operating free-air temperature –40 °C (10) Does not include the variation in voltage resulting from solder-shift and long-term effects. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 10: Timing Requirements: Serial Interface

    PH_CS SCLK D_CKCS SU_CSCK PH_CK PL_CK SCLK HT_CKDO DZ_CSDO DV_CSDO SU_DOCK Data from sample N SU_DICK HT_CKDI SU_DSYCK HT_CKDSY DAISY Figure 1. Serial Interface Timing Diagram Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 11: Typical Characteristics

    = ±2.5 × V range = ±1.25 × V Figure 6. DC Histogram for Mid-Scale Inputs (±2.5 × V Figure 7. DC Histogram for Mid-Scale Inputs (±1.25 × V Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 12 = ±0.15625 × V range = 0.625 × V Figure 12. DC Histogram for Mid-Scale Inputs Figure 13. DC Histogram for Mid-Scale Inputs (±0.15625 x V (0.625 x V Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 13 C019 C020 Range = ±1.25 × V Range = ±0.625 × V Figure 18. Typical INL for All Codes Figure 19. Typical INL for All Codes Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 14 C025 C026 Range = 0.625 × V Range = 0.3125 × V Figure 24. Typical INL for All Codes Figure 25. Typical INL for All Codes Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 15 Range = 1.25 × V Range = ±0.3125 × V Figure 30. INL vs Temperature (1.25 × V Figure 31. INL vs Temperature (±0.3125 × V Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 16 C038 Range = ±2.5 × V Range = ±2.5 × V Figure 36. Typical Histogram for Offset Drift Figure 37. Offset Error vs Temperature Across Channels Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 17 SINAD = 85.15 dB, THD = –105.28 dB, SFDR = 105 dB Figure 42. Typical FFT Plot (±2.5 × V Figure 43. Typical FFT Plot (±1.25 × V Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 18 SINAD = 82.55 dB, THD = –99.74 dB, SFDR = 105 dB Figure 48. Typical FFT Plot (±0.15625 × V Figure 49. Typical FFT Plot (0.625 × V Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 19 1000 10000 ±40 ±7 Free-Air Temperature ( Input Frequency (Hz) C056 C055 = 1 kHz Figure 54. SINAD vs Temperature Figure 55. THD vs Input Frequency Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 20 Input = 2 × maximum input voltage Figure 60. Isolation Crosstalk vs Frequency for Figure 61. AVDD Current vs Temperature for the ADS8678 Overrange Inputs = 500 kSPS) Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 21 Figure 64. AVDD Current vs Temperature for the ADS8674 Figure 65. AVDD Current vs Temperature (During Sampling) (STANDBY) ±40 ±7 Free-Air Temperature ( C077 Figure 66. AVDD Current vs Temperature (Power Down) Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 22: Detailed Description

    ALARM 1 M: AIN_6P 2nd-Order Driver REFCAP AIN_6GND 1 M: REFIO 1 M: AIN_7P 2nd-Order AIN_7GND Driver 4.096-V 1 M: Reference AUX_IN AUX_GND AGND DGND REFGND Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 23: Feature Description

    In order to maintain the dc accuracy of the system, matching the external source impedance on the AIN_nP input pin with an equivalent resistance on the AIN_nGND pin is recommended. This matching helps to cancel any additional offset error contributed by the external resistance. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 24 OVP voltage range. Note that higher source impedance results in gain errors and contributes to overall system noise performance. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 25 Input Voltage (V) C003 C004 Figure 69. I-V Curve for an Input OVP Circuit Figure 70. I-V Curve for an Input OVP Circuit (AVDD = Floating) Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 26 ±6 1000 10000 100000 5000 50000 Input Frequency (Hz) Input Frequency (Hz) C065 C064 Figure 72. Second-Order LPF Phase Response Figure 71. Second-Order LPF Magnitude Response Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 27 The internal or external reference selection is determined by an external REFSEL pin. The devices have a built-in buffer amplifier to drive the actual reference input of the internal ADC core for maximizing performance. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 28 3300 production devices. -0.6 -0.2 Error in REFIO Voltage (mV) C064 Figure 74. Internal Reference Accuracy at Room Temperature Histogram Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 29 AVDD = 5 V, number of devices = 30, ΔT = –40°C to 125°C Figure 76. Variation of the Internal Reference Output Figure 77. Internal Reference Temperature Drift Histogram (REFIO) Across Supply and Temperature Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 30 REFCAP pin as possible for decoupling high-frequency signals. Do not use the internal buffer to drive external ac or dc loads because of the limited current output capability of this buffer. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 31 AUX channel. Some key requirements of the driving amplifier are discussed in the Input Driver for the AUX Channel section. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 32 THD = –103.52 dB, SFDR = 108 dB, number of points = 64k Figure 84. SNR, SINAD, and THD vs Temperature Figure 83. Typical FFT Plot (AUX Channel) (AUX Channel) Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 33 • is the noise gain of the front-end circuit, which is equal to 1 in a buffer configuration. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 34 0 to 1.25 × V 5.12 V 5.12 V 312.50 0 to 0.625 × V 2.56 V 2.56 V 156.25 0 to 0.3125 × V 1.28 V 1.28 V 78.125 Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 35 Hysteresis Channel n Active Alarm Flag Channel n ADC Output Tripped Alarm Flag Channel n Channel n SCLK Alarm Flag Read Figure 88. Alarm Functionality Schematic Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 36: Device Functional Modes

    The SDO line goes low after the entire data frame is output and goes to a Hi-Z state when CS goes high. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 37 When the RST/PD pin is pulled back to a logic high level, the devices wake-up in a default state in which the program registers are reset to their default values. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 38 89. However, there are applications that require multiple ADCs but the host controller has limited interfacing capability. This section describes two connection topologies that can be used to address the requirements of such applications. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 39 64 SCLK cycles for the entire data frame. Note that the overall throughput of the system is proportionally reduced with the number of devices connected in a daisy-chain configuration. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 40 (SDO and SCLK). This loading can lead to digital timing errors. This limitation can be overcome by using digital buffers on the shared outputs from the host controller before being fed into additional devices. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 41 (PROG mode), then the device retains the current settings of the program registers. The device goes back to IDLE mode and waits for the user to enter a proper command to execute the program register read or write configuration. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 42 SDI is Low in a Data Frame STDBY Command ± 8200h Data from Sample N Figure 96. Enter and Remain in STDBY Mode Timing Diagram Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 43 STDBY Mode on CS Rising Edge Min width of CS HIGH = 20µs for valid sample SCLK AUTO_RST Command MAN_CH_n Command Figure 97. Exit STDBY Mode Timing Diagram Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 44 Device exits PWR_DN Mode, but frame after recovery from waits 15ms for 16-bit settling PWR_DN mode SCLK AUTO_RST Command MAN_CH_n Command Invalid Data Figure 99. Exit PWR_DN Mode Timing Diagram Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 45 Mode Setting AUTO_RST Mode AUTO_RST Mode (Channel sequence restarted from (Channels 0-2 are selected in sequence.) lowest count.) Figure 101. Device Operation Example in AUTO_RST Mode Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 46 (Ch 1 is selected and device continuously converts Ch 1 if NO_OP command is provided) (Transition from Ch1 to Ch 3) Figure 103. Device Operation in MAN_Ch_n Mode Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 47 Based on Previous Mode Setting MAN_Ch_n Mode AUTO_RST Mode Figure 105. Transitioning from MAN_Ch_n to AUTO_RST Mode (Channels 0 and 5 are Selected for Auto Sequence) Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 48 CS Rising Edge command or after reading frame data. SCLK Reset Program Registers (RST) ± 8500h Data from Sample N Figure 106. Reset Program Registers (RST) Timing Diagram Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 49: Register Maps

    Manual AUX Selection 0000 0000 E000h AUX channel input is selected (MAN_AUX) (1) Shading indicates bits or registers not included in the 4-channel version of the device. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 50 ADDR[6:0] DIN[7:0] Sample SCLK ADDR [6:0] DIN [7:0] X X X X Data written into register, DIN [7:0] Figure 107. Program Register Write Cycle Timing Diagram Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 51 (Bits 7-0) ADDR[6:0] XXXXX 0000 000 DOUT[7:0] SCLK ADDR [6:0] X X X X X X DOUT [7:0] Figure 108. Program Register Read Cycle Timing Diagram Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 52 (2) Shading indicates bits or registers that are not included in the 4-channel version of the device. A write operation on any of these bits or registers has no effect on device behavior. A read operation on any of these bits or registers outputs all 1's on the SDO line. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 53 Ch 7 High Threshold LSB CH7_HT[5:0] Ch 7 Low Threshold MSB CH7_LT[13:6] Ch 7 Low Threshold LSB CH7_LT[5:0] COMMAND READ BACK (Read-Only) Command Read Back COMMAND_WORD[7:0] Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 54 Channel 0 enable. 0 = Channel 0 is not selected for sequencing in AUTO_RST mode 1 = Channel 0 is selected for sequencing in AUTO_RST mode Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 55 AUTO_RST sequence 1 = The analog front end on channel 0 is powered down and channel 0 cannot be included in the AUTO_RST sequence Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 56 0111 = Channel 7 (valid only for the ADS8678) Two bits of device address (mainly useful in daisy-chain mode). Three LSB bits of input voltage range (see the Range Select Registers section). Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 57 0110 = Input range is set to 0 to 1.25 x V 0111 = Input range is set to 0 to 0.625 x V 1111 = Input range is set to 0 to 0.3125 x V Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 58 0 = No alarm detected Tripped Alarm Flag Ch4 1 = Alarm detected Tripped Alarm Flag Ch3 Tripped Alarm Flag Ch2 Tripped Alarm Flag Ch1 Tripped Alarm Flag Ch0 Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 59 Each individual bit indicates an active high or low alarm flag status for each channel, as per the alarm flags register for channels 0 to 7. 0 = No alarm detected 1 = Alarm detected Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 60 Each individual bit indicates an active high or low alarm flag status for each channel, as per the alarm flags register for channels 0 to 7. 0 = No alarm detected 1 = Alarm detected Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 61 Ch 7 Low Threshold MSB CH7_LT[13:6] Ch 7 Low Threshold LSB CH7_LT[5:0] (1) Shading indicates bits or registers not included in the 4-channel version of the device. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 62 0000 0001 = MSB byte is 01h 0000 0010 to 1110 1111 = MSB byte is 02h to FEh 1111 1111 = MSB byte is FFh Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 63 0000 0001 = MSB byte is 01h 0000 0010 to 1110 1111 = MSB byte is 02h to FEh 1111 1111 = MSB byte is FFh Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 64 LEGEND: R = Read only; -n = value after reset Table 26. Command Read-Back Register Field Descriptions Field Type Reset Description COMMAND_WORD[15:8] Command executed in previous data frame. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 65: Application And Implementation

    The key electrical parameters include amplitude, frequency, and phase, which are important for calculating the power factor, power quality, and other parameters of the power system. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 66 For a step-by-step design procedure, circuit schematics, bill of materials, PCB files, simulation results, and test results, see Phase Compensated 8-Channel, Multiplexed Data Acquisition System for Power Automation Reference Design (TIDU427). Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 67 C lines for the TCA6408A. The TCA6408A controls the low R opto-switch (TLP3123) that is used to switch between voltage-to-current input modes. The input channel configuration is done in microcontroller firmware. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 68: Power-Supply Recommendations

    Input Frequency (MHz) C063 C062 Code output near 8192 Code output near 8192 Figure 126. PSRR Without a Decoupling Capacitor Figure 127. PSRR With a Decoupling Capacitor Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 69: Layout

    COG (NPO) ceramic capacitors provide the best capacitance precision. The type of dielectric used in COG (NPO) ceramic capacitors provides the most stable electrical properties over voltage, frequency, and temperature changes. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 70: Layout Example

    16: AIN_0P 23: AIN_3P 17: AIN_0GND 22: AIN_3GND 18: AIN_1P 21: AIN_2P 19: AIN_1GND 20: AIN_2GND Analog Pins Figure 128. Board Layout for the ADS8674 and ADS8678 Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 71: Device And Documentation Support

    All other trademarks are the property of their respective owners. 12.5 Electrostatic Discharge Caution This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
  • Page 72: Mechanical, Packaging, And Orderable Information

    This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: ADS8674 ADS8678...
  • Page 73 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples Drawing Ball material (4/5) ADS8674IDBT ACTIVE TSSOP RoHS & Green NIPDAU Level-2-260C-1 YEAR -40 to 125 ADS8674 ADS8674IDBTR...
  • Page 74 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
  • Page 75 PACKAGE MATERIALS INFORMATION www.ti.com 5-Jan-2022 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Reel Reel Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1 (mm) ADS8674IDBTR TSSOP 2000 330.0 16.4 10.2 12.0 16.0 ADS8678IDBTR TSSOP...
  • Page 76 PACKAGE MATERIALS INFORMATION www.ti.com 5-Jan-2022 *All dimensions are nominal Device Package Type Package Drawing Pins Length (mm) Width (mm) Height (mm) ADS8674IDBTR TSSOP 2000 853.0 449.0 35.0 ADS8678IDBTR TSSOP 2000 853.0 449.0 35.0 Pack Materials-Page 2...
  • Page 77 PACKAGE MATERIALS INFORMATION www.ti.com 5-Jan-2022 TUBE *All dimensions are nominal Device Package Name Package Type Pins L (mm) W (mm) T (µm) B (mm) ADS8674IDBT TSSOP 10.2 3600 ADS8678IDBT TSSOP 10.2 3600 Pack Materials-Page 3...
  • Page 78: Notes

    PACKAGE OUTLINE DBT0038A TSSOP - 1.2 mm max height SCALE 2.000 SMALL OUTLINE PACKAGE SEATING 6.55 6.25 TYP PLANE 0.1 C PIN 1 INDEX AREA 38 X 0.5 9.75 9.65 NOTE 3 38 X 0.23 0.17 4.45 1.2 MAX C A B 4.35 NOTE 4 0.25...
  • Page 79 EXAMPLE BOARD LAYOUT DBT0038A TSSOP - 1.2 mm max height SMALL OUTLINE PACKAGE 38 X (1.5) SYMM (R0.05) TYP 38 X (0.3) 38 X (0.5) SYMM (5.8) LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE: 10X SOLDER MASK METAL UNDER SOLDER MASK METAL OPENING SOLDER MASK...
  • Page 80 EXAMPLE STENCIL DESIGN DBT0038A TSSOP - 1.2 mm max height SMALL OUTLINE PACKAGE 38 X (1.5) SYMM (R0.05) TYP 38 X (0.3) 38 X (0.5) SYMM (5.8) SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL SCALE: 10X 4220221/A 05/2020 NOTES: (continued) 8.
  • Page 81 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2022, Texas Instruments Incorporated...

This manual is also suitable for:

Ads8674Ads8678

Table of Contents