Table of Contents
Advertisement
Remove a hot-swap fan
Use this procedure to remove a hot-swap fan.
S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Before removing a hot-swap-fan:
1. Read the safety information and installation guidelines (see
Guidelines" on page
2. If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top
cover, or remove the server from the rack.
3. Watch the procedure
A video of this procedure is available at YouTube:
PLYV5R7hVcs-B2y7oAb54mfyuLrIusa_qE
4. Remove the top cover (see
To remove a hot-swap-fan, complete the following steps:
Step 1.
Pinch on the top of the fan, and press on the latch to release the fan from the connector.
ThinkSystem SR850P Maintenance Manual
62
49).
.
"Remove the top cover" on page
"Safety" on page iii
https://www.youtube.com/playlist?list=
133).
and
"Installation
Advertisement
Table of Contents
