4. If you are installing memory modules on the system board, make sure to remove the expansion tray (see
"Remove the processor and memory expansion tray" on page
the system board.
Figure 74. Air baffle removal from the system board
5. Watch the procedure
A video of this procedure is available at YouTube:
PLYV5R7hVcs-B2y7oAb54mfyuLrIusa_qE
Complete the following steps to install a memory module:
Watch the procedure
A video of this procedure is available at YouTube:
B2y7oAb54mfyuLrIusa_qE
Step 1.
Open the memory module connector retaining clips. If a memory module is already installed in the
connector, remove it.
Step 2.
Align the keys on the memory module that you are installing with the connector; then, insert the
memory module.
Step 3.
Firmly press both ends of the memory module straight down into the connector until the retaining
clips snap into the locked position.
.
.
110) and the air baffle that is installed on
https://www.youtube.com/playlist?list=
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
Chapter 3
Hardware replacement procedures
81