Table of Contents
Advertisement
Figure 59. LOM adapter assembly
To install the LOM adapter, complete the following steps:
Step 1.
Open the retention latch.
Step 2.
Align the LOM adapter to the connector, and push it in.
Step 3.
Tighten the captive thumbscrew to lock it to the system board.
Figure 60. LOM adapter installation
Step 4.
Close the retention latch.
After installing the LOM adapter, complete the following steps:
1. Reinstall the top cover (see
"Install the top cover" on page
134).
.
Chapter 3
Hardware replacement procedures
71
Advertisement
Table of Contents
