Table of Contents
Advertisement
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Important: Before you return the system board, make sure that you install the processor socket dust
covers from the new system board. To replace a processor socket dust cover:
1. Take a dust cover from the processor socket assembly on the new system board, and orient it
correctly above the processor socket assembly on the removed system board.
2. Gently press down the dust cover legs to the processor socket assembly, pressing on the edges to
avoid damage to the socket pins. You might hear a click on the dust cover is securely attached.
3. Make sure that the dust cover is securely attached to the processor socket assembly.
• If you are planning to recycle the system board, follow the instructions in
for recycle" on page 161
Install the system board
Use this procedure to install the system board.
Attention: Removing and installing this component requires trained technicians. Do no attempt to remove or
install it without proper training.
Before installing the system board:
1. Read the safety information and installation guidelines (see
Guidelines" on page
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
3. Watch the procedure
A video of this procedure is available at YouTube:
PLYV5R7hVcs-B2y7oAb54mfyuLrIusa_qE
To install the system board, complete the following steps:
Step 1.
Lower the short side of the system board and align it with the slots in the server; then, lower the
longer side.
for compliance with local regulations.
49).
.
"Disassemble the system board
"Safety" on page iii
https://www.youtube.com/playlist?list=
.
Chapter 3
Hardware replacement procedures
and
"Installation
121
Advertisement
Table of Contents
