Step 11. Remove the drive backplanes and cables connected to the system board (see
backplane" on page
Step 12. If there is an installed TCM/TPM, remove it (see
Mainland only)" on page
Step 13. Grasp the system board handle and thumbnail, and slide the system board toward the front of the
server.
Figure 120. System board removal
Step 14. Rotate the long side of the system board up, and remove the board from the server.
Figure 121. System board removal
Note: This handle only serves the purpose of removing system board. Do not attempt to lift the
whole server with it.
After removing the system board:
ThinkSystem SR850P Maintenance Manual
120
52).
129).
"Remove the TCM/TPM adapter (for Chinese
"Remove a drive