Table of Contents
Advertisement
Figure 27. Connecting NVMe cables to the processor and memory expansion tray
Before starting cable routing for 2.5-inch drives:
1. Remove the fan cage assembly (see
2. Remove the processor and memory expansion tray and the expansion tray air baffle (see
processor and memory expansion tray" on page
Connecting power cable
Connect power cables for drive backplanes as in the following illustration.
Figure 28. Location of power cable connectors on the system board
Table 26. Power cable connectors on the system board and the drive backplanes
Power cable connector on the system board
1
Power cable connector on the system board
2
Two types of drive backplanes are supported by this system:
• 2.5-inch SATA/SAS 8-bay backplane (referred to as "8-bay backplane")
• 2.5-inch AnyBay 8-bay backplane (referred to as "AnyBay backplane")
ThinkSystem SR850P Maintenance Manual
36
"Remove the fan cage assembly" on page
110).
Power cable connector on the drive backplane
3
Power cable connector on the drive backplane
4
59).
"Remove the
Advertisement
Table of Contents
