Sharp MX-C303W Troubleshooting Manual page 54

Image Send Problems
AFTER THE ROUTER WAS REPLACED, I CAN'T
?
USE SCAN TO NETWORK FOLDER OR SCAN
Check
Has the machine's IP address been
changed?
Solution
!
■ Check the IP address setting.
If the machine does not have a permanent IP address (the machine receives an
IP address from a DHCP server), scanning to network folder or scanning will not
be possible if the IP address changes.
You can check the machine's IP address in [Network Status] of setting mode. If
the IP address has changed, change the port setting in the printer driver.
 "Settings" → [Status] → [Network Status]
See: Software Setup Guide
If the IP address changes frequently, it is recommended that a permanent IP
address be assigned to the machine.
 "Settings (administrator)" → [System Settings] → [Network Settings]
54