Sharp MX-C303W Troubleshooting Manual page 20

Hide thumbs Also See for MX-C303W:

General Problems

PREVIEW IMAGES OR THUMBNAIL IMAGES DO

NOT APPEAR

Check

Are there a number of jobs waiting to

be executed?

THE TOUCH PANEL DISPLAY IS DIFFICULT TO

VIEW

Check

Is the brightness properly adjusted?

YOU WERE LOGGED OUT WITHOUT LOGGING

OUT YOURSELF

Check

Did Auto Clear activate?

I DON'T KNOW WHERE THE IP ADDRESS SETTING IS

Check

The IP address is set in the Network

Settings of Setting mode.

Solution

■ Wait until several of the jobs have been executed.

Solution

■ Tap the [LCD Control] key (

Solution

■ When user authentication is used, the currently logged in user will be

automatically logged out if Auto Clear activates. Log in again.

If you are the administrator, change the time setting of Auto Clear or disable Auto

Clear in [Auto Clear Setting].

 "Settings (administrator)" → [System Settings] → [Common Settings] →

[Operation Settings] → [Condition Settings] → [Auto Clear Setting]

Solution

■ To set a permanent IP address, ask your network administrator for the IP address

assigned to the machine and other information necessary for the Network Settings.

 "Settings (administrator)" → [System Settings] → [Network Settings]

→ [Interface Settings]

) on the home screen to adjust the brightness.

Table of Contents