Sharp MX-C303W Troubleshooting Manual page 45

Hide thumbs Also See for MX-C303W:

Fax Problems

NOTIFICATION SOUNDS ARE TOO LOUD OR

TOO SOFT, OR ARE NOT AUDIBLE (VOLUME

ADJUSTMENT)

Check

Have you adjusted the volume in the

speaker settings of setting mode?

You can adjust the volume of the

original scan complete sound in the

scan complete sound setting of

setting mode.

I DON'T KNOW HOW TO STORE OR PRINT

SENDER INFORMATION

Check

You can store sender information in

"Own Name and Destination Set" in

setting mode.

BROADCAST TRANSMISSION DOES NOT WORK

Check

Has broadcast setting been disabled

in the setting mode (administrator)?

Solution

■ Adjust the on-hook volume, ringing volume, line monitor volume, send/receive

completion volume, and send/receive error volume in "Settings (administrator)".

 "Settings (administrator)" → [System Settings] → [Common Settings] →

[Sound Settings] → [Beep Sound Settings (Common)] → [Scan Complete

Sound (Image Send)].

■ A complete sound is heard when scanning of the original is completed. In

"Settings (administrator)", select [System Settings] → [Common Settings] →

[Sound Settings] → [Beep Sound Settings (Common)] → [Scan Complete Sound

(Image Send)] to adjust the volume.

Solution

■ To store sender information, select "Settings (administrator)]

- [System Settings] → [Image Send Settings] → [Common Settings]

→ [Own Name and Destination Set].

Solution

■ Broadcast transmission cannot be performed when "Settings (administrator)" -

[System Settings] → [Image Send Settings] → [Fax Settings] → [Send Setting]

→ [Disable Fax Broadcasting] is disabled.

Table of Contents