Sharp MX-C303W Troubleshooting Manual page 10

General Problems
I CAN'T USE A PARTICULAR FUNCTION OR
?
PERIPHERAL DEVICE
Check
Have functions been disabled by the
administrator?
I DON'T KNOW HOW TO CHECK THE TOTAL
?
NUMBER OF PAGES USED
Check
Hold down the [Home Screen] key.
You can check in the status of setting
mode.
THE OPERATION PANEL CANNOT BE USED
?
Check
Is the main power indicator lit?
Did you just power on the machine?
Is the [Power Save Mode] button
blinking?
Is a cover open or a device separated
from the machine?
Solution
!
■ Check with your administrator.
Some functions may have been disabled in the setting mode. When user
authentication is enabled, the functions that you can use may be restricted in
your user settings.
Solution
!
■ When you hold down the [Home Screen] key, a message showing the total page
usage and toner level will appear.
■ [Total Count] appears in the [Status] of setting mode. You can check the total
pages used from this item.
Solution
!
■ If the main power indicator is not lit up, turn the machine's power on.
Make sure that the power plug is firmly inserted in the power outlet, switch the
main power switch to the "
■ Wait until a message appears indicating that the machine is ready.
After the [Power] button is turned on, the machine requires some time to
complete warmup operation. During warmup operation, functions can be
selected, but a job cannot be run.
■ Auto Power Shut-Off mode has activated. To return the machine to normal
operation, press the [Power Save Mode] button. For more information, see the
"User's Manual" .
■ Read the message and take appropriate actions.
A warning message will appear when a cover is open or a device is separated
from the machine.
10
" position.